Tanks

Carbon steel boilers, complete with anodic protection. Internally thermo-enamelled according to DIN4753-3 and UNI 10025 standards.  290/220 mm inspection flange.

Max. operating pressure of the sanitary: 10bar (mod. 200 1.000lt); 8bar (mod. 1.500 2000lt)

Max. operating temperature: 95 ºC

W-Total F: sanitary boiler without heat exchangers

100mm soft polyurethane insulation (mod. 200 500)

Insulation in 100mm soft fiber vlies, energy class C (mod. 800 2000).

W-Total 1: sanitary boiler with a heat exchanger (heating or solar)

Insulation: 50 mm thick rigid polyurethane (mod. 150 500);

Insulation in soft fiber vlies 100 mm, energy class C (mod. 800 2000).

W-Total 2: sanitary boiler with two heat exchangers (heating and solar)

Insulation: 50 mm thick rigid polyurethane (mod. 200 500);

Insulation in soft fiber vlies 100 mm, energy class C (mod. 800 2000).

Boiler with integrated solar station and solar control unit, W-Compact series

Composed of:

Enamelled boiler according to DIN4753, with 2 heat exchangers
50 mm PU foam insulation
Two Line Solar Station with Air Separator
6 bar safety group with pressure gauge
High efficiency pump
A control unit to a WCR1 circuit
Copper side connections 18 mm
All components assembled, wired and ready

AISI 316L stainless steel sanitary boiler with one exchanger or two exchangers.

180/120 mm inspection flange.

Rigid polyurethane insulation thickness 50 mm (mod. 200 500lt.).

Insulation in soft fiber vlies 100 mm, energy class C (mod. 800 2000).

Max. operating pressure of the sanitary: 10bar (200 1.000lt); 6bar (1.500 2.000lt)

Max. heat exchanger working pressure: 10bar

Max. boiler operating temperature: 95°C

Boiler for integrated systems by heat pump for ACS production, made of carbon steel, with one or two larger heat exchangers, complete with anodic protection, internal treatment according to DIN 4753-3 and UNI 10025 standards Inspection flange: L 180/120 mm (300 1.000lt)290/220 mm (1.500 2.000lt)

Insulation: rigid polyurethane 50mm (mod. 300 500lt);

100mm soft fiber vlies insulation, energy class C (mod. 800 2,000lt)

Max. operating pressure of the sanitary: 10bar (mod. 300 1.000lt); 8bar (mod. 1.500 2.000lt)

Maximum heat exchanger pressure : 10 bar

Max. operating temperature kettle : 95°C

W-PS series heating water buffer storage:

S 235 JR carbon steel storage built according to DIN4753
Inside raw, outside with anti-corrosion paint
100mm soft fiber vlies insulation
PEXL insulation 30 mm (800 2000lt)
Max. heating operating pressure 3 bar
Max. operating pressure of the exchanger 6 bar (W-PS1 and W-PS2)
Available in 3 versions:

W-PS without heat exchangers
W-PS1 with 1 heat exchanger (solar)
W-PS2 with heat exchangers (heating and solar)

Buffer storage for heating water and chilled water W-PSS series:

S 235 JR carbon steel storage built according to DIN4753
Inside raw, outside with anti-corrosion paint
Rigid polyurethane insulation 50 mm (50 500lt)
PEXL insulation 30 mm (800 2000lt)
Max. heating operating pressure 6 bar (50 500lt)
Max. heating operating pressure 3 bar (800 2000lt)
On all models it is possible to design and produce customized models

Combined storage with heating water tank and domestic water in corrugated stainless steel pipe with solar heat exchanger.

S 235 JR carbon steel storage built according to DIN4753
Domestic water in V4A stainless steel corrugated pipe
inside raw, outside with anti-corrosion paint
100mm polyester fiber thermal insulation, CFC-free, with Skaimantel
Available in 3 versions of 600, 800, 1,000, 1,250, 1,500, 2,000 liters:

W-Fresh with corrugated stainless steel ACS pipe without heat exchangers
W-Fresh1 with corrugated stainless steel ACS tube and a heat exchanger (solar)
W-Fresh2 with corrugated stainless steel ACS tube and two heat exchangers (heating + solar)

On all models it is possible to design and produce customized models